Quadrox GuardNVR Manuel d'installation télécharger pdf (Page 24)

GuardNVR Installation Manual 24

In order to facilitate remote connections to GuardNVR, it is recommended you use a

static IP-address.

To manually configure an IP address on Windows XP, follow the steps below:

 Click Start->Settings->Control Panel.

 In Control Panel, select Network and Internet Connections.

 On the Network and Internet Connections sheet, select Network Connections.

 In Network Connections, right-click the local area connection that you want to

modify.

 Select Properties.

 On the General tab of the Properties sheet, select Internet Protocol (TCP/IP).

 Click Properties.

 On the General tab of the TCP/IP Properties sheet, select the Use the following IP

address option.

 Enter the IP address, subnet mask, and default gateway for the selected adapter in

their respective text boxes. The network administrator must provide these values for

individual users, based on the IP addressing scheme for your site. The value in the IP

Address text box identifies the IP address for this network adapter. The value in the

Subnet Mask text box is used to identify the network ID for the selected network

adapter. If needed, the DNS server address can be entered also.

 Click OK to save the IP addressing information.

 Click OK to save the connection properties.

For Vista users, please check the OS manual. The configuration differs slightly but

the idea behind the configuration stays the same.

2.5.4 Firewall configuration

The following ports need to be opened for connections going towards the

GuardNVR:

1. TCP Port 80: http

2. TCP Port 1518: GuardNVR control connection

3. UDP Ports 4096 till 4223: GuardNVR video streaming

4. TCP Port 3389: Remote Desktop connection (Optional). Frequently asked by

support when you have an issue)

RTP uses two UDP ports per stream (versus one in the old streaming format in

versions prior to V4.0.0.0), one for RTP (the video stream itself) and one for RTCP

(QoS signal stream), limiting the software to a maximum of 64 concurrent streams.

This number can be limited (e.g. for security purposes) or extended using the Settings

> Network settings page. In that case, Quadrox recommends you to open a number of

spare ports to avoid switching issues, e.g. 4 ports extra. The first port in the range

should be even.

Like all applications which communicate over networks, GuardNVR uses communication

channels to pass data (commands, video, web-pages, etc …) back and forth. The network

language that the GuardNVR uses is called TCP/IP. This is not a unique language but a

Version 4.3 Series

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 80 81

Pas de commentaire

Quadrox GuardNVR Manuel d'installation Page 24